Compresor cu șurub APS 20 Combi Dry X 10 bar 20 CP/15 kW 1870 l/min 500 l
Stoc epuizat
The Airpress APS20 Combidry X is driven directly from the engine and therefore has a fixed speed. The compressor has a 500 liter boiler and a cooling dryer. With its yield of 1870 liters per minute you can use the compressor during a large number of activities.
The APS 20 Combidry X can be purchased in our webshop, but if you would like advice or a suitable offer for a complete industrial installation, you can also contact our expert, Robin Snoek, +31 6 225 20 580 and / or rsnoek@airpress.nl.
- Aveți nevoie de ajutor? Contactați-ne!
- Datorită cunoștințelor noastre, aveți cel mai bun produs.
- Livrare în 2-3 zile
- Peste 65 de ani de experiență pe piața europeană!
Detalii produs
| SKU | 369020 |
|---|---|
| EAN 13 | 08712418372281 |
| Lungime (mm) | 1850 |
| Lățime (mm) | 820 |
| Înălțime (mm) | 1880 |
| Greutate (kg) | 530,00 |
| Sarcină de lucru (muncă/odihnă %) | 100/0 |
| Puterea motorului (cp / kW) | 20.0 HP / 15.0 kW |
| Clasa de eficiență a motorului | IE3 |
| Tip motor | AC |
| Antrenare | Direct driven 1:1 |
| Panou de control | MAM-860 |
| Limbi disponibile | English, Dutch, Polish |
| Uscător | Yes |
| Tensiune uscător (V) | 230 |
| Rezervor aer | Da |
| Capacitate rezervor aer (l) | 500 |
| Rezervor galvanizat | Nu |
|---|---|
| Presiune maximă (bar) | 10 |
| Presiune de tăiere (bar) | 6 |
| Livrare aer liber (l/min) | 1870 |
| Livrare aer liber (m3/h) | 112.2 |
| Nivel de zgomot dB (A) (0 m) | 63 |
| Nivel de zgomot dB (A) (4 m) | 43 |
| Tip priză | EU |
| Conexiune principală de aer (") | 3/4 |
| Temperatura minimă ambiantă (°C) | 10 |
| Temperatura maximă ambiantă (°C) | 45 |
| Fără ulei | Nu |
| Etape | 1 |
| Pornire | Y-∆ |
| Tensiune (V) | 400 V / 50 Hz / 3 Ph |
| Viteză variabilă (IVR) | Nu |
Descriere produs
The APS 20 Combidry X is a 15kW direct-driven screw compressor with a fixed speed. Due to the compact design, this machine takes up little space and can therefore stand in places where there is little space. The compressor has a yield of 1870 liters per minute, with a 500 liter compressed air boiler and a cooling dryer. The direct coupling of the electric motor with the screw block results in fewer losses than with a belt-driven screw compressor. A large screw block ensures a high airflow at a low speed, so continuous loading is no problem at all. The most important parameters can be read and adjusted on the display of the controller. A large horizontally placed oil cooler with temperature-controlled fan ensures excellent cooling. The machine has been carefully designed so that fewer parts are maintenance-sensitive. The service interval of 3,000 hours also ensures lower maintenance costs. This compressor can be used at large garage companies, damage repairers but also when controlling sorting machines in the horticultural sector.
X series Screw compressors
By continuously investing in the development of our products, the Airpress Group presents a new series of screw compressors. The screw compressors are available from 5.5 kW to 37 kW. The APS X series is available in two versions: controlled at a fixed speed or speed. Machines of 15 kW are also available with a two-stage screw block. These versions have an increased performance with the same power consumption as a single-stage version. Depending on demand, these machines are available as a separate unit, mounted on a tank or mounted on a tank and equipped with a compressed air dryer. Compressors of the X series are characterized by a new generation of screw blocks. The direct drive avoids losses due to the transmission. Reliable and efficient, easy-to-use screw compressors ensure trouble-free operation at minimal costs. Equipped with a modern control panel, you can constantly monitor the screw compressor and change parameters if necessary. With Smartcontrol
Documente
Produs alternativ
